People ask this for two reasons: they do not want to wake the house, and they are worried a machine on the stairs will dominate the place.
Both concerns are reasonable and both are smaller than expected.
What you actually hear
A steady low hum from the drive, and a faint mechanical sound as the carriage engages the rail. Conversation happens over it comfortably. It is quieter than a vacuum cleaner and considerably quieter than a washing machine on spin.
We are not going to publish a decibel figure, because manufacturers measure differently and the number varies with the flight, the wall surfaces and the house. If a supplier quotes one, ask how it was measured.
What makes one quieter than another
The drive type. A rack and pinion drive engaging a gear rack produces a different sound from a cable or chain arrangement.
The rail and how it is mounted. A rail fixed solidly transmits less than one with any movement in it, which is one reason the annual fixing check matters.
The house. A carpeted flight in an older house with soft furnishings is quieter than a bare timber stair in a hard-surfaced hallway, and the same lift will sound different in each.
Age and condition. A lift gets louder as things wear, which is useful information rather than a problem.
Sounds that are normal
A change in tone as the carriage passes between rail sections on a curved lift. A slight difference going up versus down, because the motor is working differently. A soft click as the lift parks and engages the charging contacts.
A faint whine from the drive throughout travel is ordinary.
Sounds that are not
Grinding or scraping. Stop using it and call.
A new noise at one specific point on the rail. Usually something on the rail or a fixing that has loosened, and it is worth a call before it becomes wear.
Getting steadily louder over months. Something is wearing. Better found at a service than in a failure.
A knock at the start or end of travel. Frequently a travel limit needing adjustment.
Beeping while parked. Usually telling you it is not charging, which means it is not parked where it should be.
Our troubleshooting guide covers what each of those usually means.
Night use, specifically
The real question behind this one is whether somebody can use it at three in the morning without waking the household.
In most houses, yes. What carries is not the motor but structure-borne sound through the staircase, so a flight against a bedroom wall transmits more than one in a hallway.
If that matters, say so at survey. Which side the rail goes on and how it is fixed both affect it, and both are decided before installation rather than after.
Do not lubricate it to quieten it
The instinct when something gets noisy, and it makes things worse. Harmar’s drive uses a nylon polymer gear rack that requires no grease, and adding some attracts grit which accelerates wear.
A noisy lift needs a service rather than a spray can.
What to do on a test ride
Ride the full length in both directions and listen. Ask somebody to stand at the top while you ride, so you hear it from outside as well as in the seat.
Ask to hear a curved lift if you are buying curved, because a straight lift tells you nothing about how joints sound. Our guide to trying equipment covers what else to test.
Keeping it quiet
Park it at a charging point. Keep the rail clean and free of grit. Have it serviced annually so fixings are checked and torqued. Do not add lubricant.
That is the whole regime, and our maintenance guide covers what a visit should include. Smaller equipment ships free from our online shop.
Outdoor lifts
Slightly different, because there is no soft furnishing to absorb anything and because neighbours may be closer than family.
The mechanism is the same and the sound carries further across a garden than along a carpeted hallway. It is still quieter than most garden machinery and considerably shorter in duration.
Our outdoor guide covers living with one.
Hearing aids and the practical version
Worth a note. Somebody with hearing loss may not hear the lift arrive, the beep that signals it is not charging, or a fault tone.
Where that applies, ask whether the model has a visual indicator as well as an audible one, and make a habit of checking the display rather than listening for it.
What to tell a supplier
If somebody sleeps next to the staircase, say so at survey. Which side the rail goes on, how the brackets are fixed and where the transformer sits all affect what carries, and all are decided before installation.
Our installation guide covers what happens on the day, and Bruno and Harmar both publish their equipment specifications through authorized dealers.
Noise as a maintenance signal
The practical takeaway. The sound a lift makes is the cheapest diagnostic you have and it is free.
Ride it once a month with the television off and pay attention. A new sound, a sound at one point on the rail, or a steady increase over months are all worth a call before they become a failure. Note what you hear and when, because a pattern across a year tells a technician more than a single visit.
Our maintenance guide covers what a service should include, and smaller equipment ships free from our online shop.
What the household should agree
Two small habits remove most of the night-time concern. Park it at the end it will next be needed from, so nobody rides it twice. And tell whoever sleeps nearest that they will hear it, so the first time is expected rather than alarming.
People adapt within a week, and the households that struggle are the ones where nobody discussed it.
Comparing models on sound
Ride both if you can, on real stairs rather than a display stand, in a hallway rather than a showroom floor. Ask to hear it from the top of the flight while somebody else rides.
That tells you more than any published figure, and our guide to trying equipment covers the rest of what to test.
